ORIGINAL POST: I'm finally getting a dual wide screen setup for my computer. Something I've never had in the past. To prepare for this momentous occasion, I'm building a stacked dual landscape stand out of PVC. To see how I do this, stay tuned.
PARTS LIST:
● 2x 4-1/2" x 4-1/2" square metal plates
● 2x crushed rocks (Lowe's had a quart container of this)
● 10' 1-1/4" PVC pipe
● 7x 1-1/4" PVC elbow
● 6x 1-1/4" PVC tee
● 1x 1-1/4" PVC 4-way
● 2x 1-1/4" PVC hex head plug
● 1x 100 pk #10 x 3/4" pan head screws
● 2x 5/16" x 1" bolt
● 2x 5/16" nut
● 2x 1/4" fender washers
● 8x 1/4" nut
● 8x M4 x 20 .70 pitch (these screws replaced the stock mounting screws - 1/4" longer)
● 1x Goop glue
For reference, these are the measurements I took from my pair of Dell E2417H monitors:
- horizontal or vertical, between each mounting screw hole O.C. = 3-15/16
- mounting plate should be no larger than = 4-1/2" x 4-1/2"
- edge to edge monitor height (not screen) = 13-1/8"
- monitor bottom edge to top screw O.C. = 8-1/2"
- monitor top edge to top screw oc = 4-9/16"
Intro music track provided by the Frequency channel on YouTube.
Download link to all music is in each song's description.
🎼 Track: by Emeth Paul - Turn Up
🔗
Outro music track provided by the Frequency channel on YouTube.
Download link to all music is in each song's description.
🎼 Track: by Emeth Paul - "Turn Up"
🔗
0 Comments